3-joint/4-section bed, variable height, fully electric movement.

Network frame
External perimeter load-bearing structure made of rectangular section steel profiles. Movable section frame made of oval section steel tube. Steel slatted bed base. Mattress support guides. Equipped with two supports for patient lifting pole and IV pole. 4-section bed base. Headrest section and leg section adjustable by means of two 24V DC electric motors and push-button panel. Foot section with rack adjustment. Fixed pelvis section.

Variable height
The vertical movement of the bed base, between approximately 26 cm. minimum height and 82 cm. maximum height, is adjustable by means of two electric motors inserted inside the bed head panels.

Trendelenburg
Trendelenburg movement up to 12° and anti-Trendelenburg up to - 12° via command on the same keypad.

Shores
Vertical sliding with two uprights. Natural beech finish. Fixed to the headboards by means of sliding devices. Sides unlocked by means of a button on the headboard. Sides - Internal structure in painted steel tube. Cover made of a single block of wood with natural beech finish with upper edge and side edges in solid wood, complete with built-in sliding guides for the insertion of side edges.

Legs
Integrated into the backrests complete with 4 swivel twin wheels Ø 80 mm each equipped with independent brake.

Finish
Oven painted at 200°C with epoxy powders. Beige color.

Equipment
Equipped with a lifting pole complete with triangle and adjustable nylon strap.

ISO CODE 18.12.10.009 + 18.12.91.006
CND Y181299 - RDM 2264339
Measurements: Bed base cm. 120x200



barcode: 8055773183001
code: 8938A