3-joint/4-section bed, variable height, fully electric movement.
Net frame - External perimeter load-bearing structure made of rectangular section steel profiles.
Frame of movable sections made of oval section steel tube.
Steel slatted bed base, non-removable mattress support guides.
Equipped with two supports for patient lifting pole and IV pole. 4-section bed base.
Headrest section and leg section adjustable by means of two 24V DC electric motors and button panel.
Foot section with rack adjustment.
Fixed pelvis section. Shoulders – Internal structure in painted steel tube.
Cover made from a single block of wood with a natural beech finish, with top edge and side edges in solid wood, complete with built-in sliding guides for the insertion of side rails.
Legs - Integrated into the backrests complete with 4 swivel wheels Ø 125 mm, each equipped with an independent brake.
Variable height - The vertical movement of the bed base, between approximately 40 cm. minimum height and 82 cm. maximum height, is adjustable by means of two independent electric motors inserted inside the bed head panels.
Trendelenburg - Trendelenburg movement up to 12° and anti-Trendelenburg up to - 12° via command on the same keypad.
Sides - Vertical sliding with two uprights with natural beech finish, fixed to the heads by means of sliding devices.
Upper and lower lock/unlock buttons for lowering and removing the sides.
Finish - Epoxy powder coating on sandblasted surface. Color Grey.

Dimensions:
Maximum load: 135 kg
Height from net to floor: 37 - 79 cm
Total external length: 210 cm
Total external width: 103 cm
Wheel diameter: 12.5 cm

Included:
1 Patient lifting pole complete with triangle and adjustable nylon strap



barcode: 8055773182813
code: A8935A