ISO CODE 18.12.10.009 + 18.12.91.006
CND Y181299 RDM 2295911
3-joint 4-section bed, variable height, fully electric movement.

• Network frame
Load-bearing structure
external perimeter made of rectangular section steel profiles. Frame of movable sections made of rectangular section steel tube, rounded edges. Rigid bed base made of rectangular mesh steel rod welded to the movable frame. Equipped with two supports for patient lifting pole and IV pole.

• Network plan sections
Network plan
4 sections. Headrest section and leg section adjustable by means of 24V DC electric motor and free push-button panel. Foot section automatically adjustable with the leg section. Fixed pelvis section.

• Shoulders
Internal structure in painted steel tube. Wooden cover in natural beech finish with upper edge in solid wood, complete with built-in sliding guides for the insertion of side rails.

• Legs
Integrated into the backrests complete with 4 swivel wheels Ø 125 mm, each equipped with a brake

• Variable height
The vertical movement of the bed base, between approximately 39 cm. minimum height and 79 cm. maximum height, is adjustable by means of two independent electric motors inserted inside the bed head panels.

• Trendelenburg
Trendelenburg movement up to 12° and anti-Trendelenburg up to - 12° via command on the same keypad.

• Banks
Vertical scrolling
with two uprights with natural beech finish, fixed to the heads by means of sliding devices.
Upper lock/unlock buttons for lowering and removing the sides. Adjustable to two different heights 36 and 42 cm from the bed base.

• Finishing
Oven painted at 200°C with epoxy powders. White color.



barcode: 8055773184336
code: A8939