Bed for the hospitalization of people hospitalized for health reasons in institutions, hospital and/or healthcare facilities or in a home environment.

Main features:
- Structure in powder-coated tubular steel, top in wooden slats.
- Mounted on four 125mm swivel wheels all with total lock.
- Wooden headboard, footboard, aluminum sides covered with wood effect.
- Headrest and legrest adjustable by means of a monobloc electric motor.
- Variable height by means of two actuators housed in the headboards of the bed and adjustable individually or simultaneously, so as to obtain the functions: flat elevation - trendelenburg - counter trendelenburg.
- Supports for patient lift pole and IV pole.
- Patient lift pole, table, optional IV pole.

Technical features:
External dimensions: 216 x 102 x 127 cm
Net dimensions: 187 x 80 cm
Maximum height at the ends: 127 cm
Minimum height of the frame: 25 cm
Bed base height: 40 - 81 cm
Maximum head raising angle: 70°
Maximum leg lift angle: 30°
Tilt angle: 12°
Total weight: 99 kg
Electric kit weight: 12 Kg
Force required to operate the controls: 5 N
Maximum patient weight: 135 kg
Safe working load: 170 kg
Motorization: Ti-MOTION
Power supply: 220V Vac 50-60 Hz
Output voltage from the control unit: 24V DC
Protection class: IP 54
Insulation class: Class 2
Noise level: <45 dB
Base: Painted steel
Structure and sides: Wood



code: MP394